地址:北京市海淀区中关村软件园11号楼

电话:15301310116(微信同号)

邮箱:sales@madison-tech.com


麦迪森科技(深圳)有限公司

手机:18511156972

地址:广东省深圳市龙岗区甘李六路12号中海信13栋A座3层西侧



快速通道

产品分类

联系我们

【Madison】Apiezon AP101 Grease

北京麦迪森是Apiezon中国区代理商,提供Apiezon全系列产品,可提供报关单,TDS,MSDS,COA检测报告等资料,如需选型请联系15301310116(微信同号)

Apiezon is manufactured by M&I Materials LIMITED.The following content is shared by Madison Technology Co. Ltd.

What is Apiezon AP101 grease?

 

Apiezon is manufactured by M&I Materials LIMITED.Apiezon AP101 is a silicone-free, excellent general purpose, hydrocarbon grease, which is intended for a variety of industrial and scientific applications.

Apiezon AP101 Grease

Apiezon AP101 Grease


Apiezon AP101 is a specialist, anti-seize vacuum grease, containing PTFE, which confers superior anti-seize properties providing glass and metal surfaces with long-lasting lubrication and protection from fusing and corrosion.

What are the properties of Apiezon AP101 grease?

Apiezon AP101 is a silicone-free anti-seize vacuum grease which:

is ideally suited for use in low to medium vacuum ranges having a vapour pressure of<10-5 Torr at 20°C

has anti-seize properties, making it an effective protector and lubricant for metal surfaces which may be subject to seizure or corrosion

is a critical lubricant

is insoluble in most solvents, is resistant to water, alcohols, ketones and esters

resists attack from aqueous acid and alkali solutions, alcoholic alkali solutions and corrosive gases.

is suitable for use over a wide temperature range

does not suffer from contamination problems associated with silicone based greases such as ‘creep’ or ‘carry over’

is easy to clean and remove using hot water and an aqueous glassware detergent or hydrocarbon solvents.

Available to buy in 50g tubes.

When should Apiezon AP101 grease be used?

Apiezon AP101 with its superior anti-seize properties is typically used to maintain the smooth operation of stopcocks and taps in scientific and industrial settings. Coupled with easy separation of ground or polished glass joints AP101 is an excellent general purpose grease for laboratory use.

The value of Apiezon AP101 anti-seize properties is not limited to laboratory or glassware use, but is equally effective when used on metal equipment which may be subject to seizure or corrosion. Just a small amount of AP101 on fastenings which, when exposed to corrosive environments would normally jam solid, will ensure they are protected.

Apiezon AP101 is an excellent general purpose grease for sealing joints and is ideal for use in critical lubrication conditions such as highly stressed bearings.

Being hydrocarbon based, Apiezon AP101 does not suffer from the problems of “creep” or “carry over” which is traditionally associated with silicone greases. It reduces sample contamination and consequently the risk of interference in analytical techniques such as infra-red and mass spectrometry. Additionally AP101 can be used with confidence in paint spraying and metal deposition processes.

To find out more about Apiezon AP101 Grease or the Apiezon family of silicone-free high vacuum greases manufactured by M&I Materials Ltd, contact our team of experts available via our helpline and online.

Apiezon AP101 Grease Vapour Pressure Graph

Apiezon AP101 Grease

真空脂选型表

The above is shared with you by Madison Technology Co., Ltd Apiezon AP101 Grease.

Apiezon AP101 Grease

阿佩佐Apiezon  L超高真空润滑脂    阿佩佐Apiezon  M超高真空润滑脂    阿佩佐Apiezon N低温真空润滑脂    阿佩佐Apiezon H高温真空润滑脂   阿佩佐Apiezon PFPE501超高真空润滑脂

  Apiezon L超高真空润滑脂                 Apiezon M真空润滑脂                    Apiezon N低温真空脂                   Apiezon H高温真空润滑脂            Apiezon PFPE501高温真空润滑脂

Sub-D真空馈通    Sub-D组合功率型真空馈通      BNC同轴型真空馈通               

         Sub-D真空馈通                       Sub-D组合功率型真空馈通                 BNC同轴型真空馈通                           N型热电偶Sub-D馈通                            三同轴真空馈通

超声清洗机降噪箱                真空泵降噪箱               MT160-PCRC                  MT160-PISC             真空腔体定制Ⅱ型

    降噪箱I型(可定制版)                            真空泵降噪箱II型                               超高真空连接头                                      超高真空连接器                               真空腔体定制Ⅱ型